Subsidence And Heave

Newman Building Solutions – Case Studies relating to subsidence and heave

Subsidence Repairs

Subsidence is a common structural defect which puts structures in serious jeopardy and at risk of collapse.

Subsidence is common across the South East of England and in areas where the ground conditions are formed up of clay. Clay absorbs lots of moisture during wet periods causing it to swell and lift the foundation and once the ground dries it shrinks back to its original state or smaller which causes the foundation to drop.

Subsidence Repairs

There are other causes of subsidence such as vibration from machinery, road traffic, trains etc. As well as vibration other factors such as changes in the water table, failed drainage or incorrect foundation types and depths.

Newman Building Solutions are specialists in carrying out subsidence repairs using bed joint reinforcement and piling solutions in order to repair structures with minimal disruption.

Subsidence Repairs Oxford

Here is our latest subsidence and structural repair solution for a recent project in Oxford.

Author: Jon Newman
Categories: Current Projects, Subsidence And Heave

Subsidence And Heave Explained

Subsidence and heave explained.

Subsidence is a common problem in London and the South East of England with an estimated 3.7 million home owners at risk within the region covering over 140,000 postcodes.

Why is subsidence such a problem in London and the South East? Well the majority of the properties within London and the South East are Edwardian or Victorian built and certainly the vast majority were built before the 1970’s. Built on shallow foundations on a clay sub soil which is susceptible to shrinkage and heave with our ever changing adverse weather condition causing changes in ground conditions causing subsidence.

How is subsidence recognised? The location of the cracking for subsidence is normally located around window and door openings in vertical staggered form with the width of the crack normally wider at the top than at the bottom, Heave is different, it is the expansion of the sub soil lifting the building and this is recognised with similar crack locations but often the crack is wider at the bottom than at the top.

Subsidence is caused by ground movement but in order to locate the source of the ground movement obvious factors are undertaken during our survey such as the location of tress which can suck large volumes of moisture from the soil, drains – which in some instances fail causing the soil beneath to wash away. Excavations beneath the ground such as tunnelling for Londons crossrail, expansion of the water and sewage systems and the increasing number of basements can also be the culprit of subsidence.

Subsidence and heave can in some instances be repaired using the Twistfix Heliforce system by creating masonry beams across the brick panels connecting the whole building allowing it to act as one structure instead of individual brick panels that distributes structural loads.

In instances were subsidence cannot be repaired using the Twistfix Heliforce system alone, it is incorporated with either mass concrete underpinning or more conventionally mini piling systems that drive piles down to bedrock or firm made up ground preventing the structure from subsiding or heaving in the event of further ground movement.

Subsidence Repair

Visit our case studies here for subsidence repairs.

Author: Jon Newman
Categories: Subsidence And Heave